Home Device Firmware Updates

This page assists you in updating the firmware on your device, applicable to Batch 004 and later devices. For Batch 001 - 003, please refer to the update procedures for macOS or Windows

We will update this page when new firmware becomes available. If you do not wish to update the firmware on your device and you clicked the "firmware update" button in the application and landed on this page, please unplug and re-plug the device to use it again. If your device is in bootloader mode (You see a drive that is called "MuteMeBoot") and won't exit by unplugging and plugging back in, please load the proper firmware back on to your device by following the instructions below.

Firmware Update Procedure (Batch 004 + Devices)

If you accidentally deleted firmware, loaded incorrect firmware, or need to reset the firmware on your device, or wish to load new firmware follow these instructions:

Step 1: Open our application, navigate to the diagnostic tools section, and find the firmware update button. Click it and accept the prompt. Only do this if necessary. We do not endorse firmware updates without a clear purpose or necessity.

Step 2: Right-click on the file for your device below (batch numbers are on the bottom of the device), select "save link as," and copy the file directly to the MuteMeBoot USB device that has appeared. Avoid saving the files on your computer to prevent corruption, especially on macOS.

Do not attempt to save any other files on the MuteMeBoot USB device. It is not a real USB drive; it's solely for firmware updates.

Regular Firmware Files

Firmware Features Batch Number Firmware File
Standard Firmware 4-5
Standard Firmware 6-9
Firmware with Disabled LED on Startup 6-9
EMI Shielded Firmware for Reduced Sensitivity (Recommended) 6-9

MuteMe Mini Firmware Files

Firmware Features Batch Number Firmware File
Optimized Firmware for MuteMe Mini (Recommended Version) -

Low Speed Firmware Files

You can opt for the LOW SPEED version of the Firmware when dealing with lengthy cable runs or when connecting through daisy-chained hubs. While it hasn't undergone extensive testing, this firmware can be employed in scenarios where enhanced USB communication is necessary. It's important to note that this lower-speed firmware may not receive future updates.

Firmware Features Batch Number Firmware File
Low Speed Standard Firmware 4-5
Low Speed Standard Firmware 6-8
EMI Shielded Firmware for Enhanced USB Communication 6-9

Last Updated: 9:26 AM - PST - March 1, 2024